Have A Question?
Call 0800 477 778
Christchurch Homeowners: Cut Your Hot Water Power Bills with
a 2-in-1 Heat Pump — Limited-Time Offer”
Christchurch Homeowners: Cut Your Hot Water Power Bills with a 2-in-1 Heat Pump — Limited-Time Offer”
Upgrade To A 2-in-1 Heat Pump — Slash Your Hot Water Bills Without Breaking The Bank.
Upgrade To A 2-in-1 Heat Pump — Slash Your Hot Water Bills Without Breaking The Bank.
Warmth.NZ’s 2-in-1 Heat Pump Hot Water System — Fully Installed in Christchurch From $6,499*
Warmth.NZ’s 2-in-1 Heat Pump Hot Water System — Fully Installed in Christchurch From $6,499*
Reliable hot water, lower energy bills, and a more efficient home — all with a 2-in-1 Heat Pump designed for Christchurch homes.
Reliable hot water, lower energy bills, and a more efficient home — all with a 2-in-1 Heat Pump designed for Christchurch homes.
Why Kiwi Homes Choose Warmth.NZ’s 2-in-1 Heat Pump Hot Water Cylinder
Energy Efficient
Heat pumps use significantly less energy than standard cylinders — helping reduce monthly power costs without compromising on performance.
Built for NZ Weather
Engineered to perform efficiently in cooler, damp climates — perfect for homes throughout New Zealand.
Compact, All-In-One Design
A single, tidy unit that saves space and simplifies maintenance.
Reliable Hot Water
Fast recovery times ensure your whole household gets steady, dependable hot water — even at peak times.
Lower Carbon Footprint
Using less power means doing your part for a more sustainable New Zealand.
A Better, Smarter Way to Heat Your Water
If your current hot water cylinder is old, noisy, or costing you more than it should, upgrading to a 2-in-1 heat pump water heater is one of the most cost-effective improvements you can make to your home.
Our system uses advanced heat pump technology to heat your water far more efficiently than traditional electric or gas cylinders. That means:
Lower power bills
Consistent, reliable hot water
Quiet, efficient operation
A long-lasting, future-ready solution
Lower power bills
Consistent, reliable hot water
Quiet, efficient operation
A long-lasting, future-ready solution
And right now, you can get it installed from just $6,499.
What’s Included in This Offer
When you claim the special price, you’ll receive:
Supply of Warmth.NZ’s 2-in-1 Heat Pump Hot Water Cylinder
Full installation by certified Warmth.nz technicians
Removal of your old cylinder (if needed)
System setup, testing, and commissioning
Manufacturer warranty + Warmth.nz workmanship guarantee
Optional upgrades depending on your home’s setup
All From $6,499 installed — transparent
pricing with no hidden costs.
All From $6,499 installed — transparent
pricing with no hidden costs.
The Numbers Tell the Story — and They’re Surprisingly Clear
Provider
Product Size
Price
Value
Competitor A
190L
$7,000
Lower Capacity
Competitor B
270L
$7,000
Higher Price
Competitor C
280L
$7,325
Highest Price
Warmth.nz
270L
$6,499
Best Price
Is the 2-in-1 System the Right Solution for You?
Is the 2-in-1 System the Right Solution for You?
Warmth NZ’s advanced hot water system is the ideal upgrade if you:
Warmth NZ’s advanced hot water
system is the ideal upgrade if you:
Want to cut energy bills by up to 70%
Are frustrated by weak hot water pressure
Want external installation to free up indoor space
Are replacing an old gas, diesel, boiler, or electric heater
You’re looking for a modern, low-maintenance solution
How the Process Works:
1.
Enquire Today
Fill out a quick form and we’ll be in touch to confirm your home
details.
2.
Home Assessment
We check your setup to make sure the system is the right fit.
3.
Professional Installation
Our technicians complete the installation cleanly and efficiently.
4.
Enjoy Lower Bills + Reliable Hot Water
A more comfortable home, every day of the year.
1.
Enquire Today
Fill out a quick form and we’ll be in touch to confirm your home
details.
2.
Home Assessment
We check your setup to make sure the system is the right fit.
3.
Professional Installation
Our technicians complete the installation cleanly and efficiently.
4.
Enjoy Lower Bills
+ Reliable Hot Water
A more comfortable home, every day of the year.
Testimonials
Nigel & Claire
"If I were to build again, I would undoubtedly choose underfloor heating and Warmth.NZ," he states. "The quality of their work and their commitment to customer satisfaction impressed me. They delivered a warm, comfortable home within our budget and helped us avoid a cookie-cutter solution."
Brian
"Getting older, we just didn’t want fireplaces or log burners. So we chose underfloor heating," says Brian. “Our bill has gone down substantially. I’ve seen the pattern and I watch the graphs, and I’m very confident that we’re going to save a lot of money. We’ve been very happy, and we’d thoroughly recommend Warmth.NZ.”
"After a last-minute letdown by another company, we turned to Warmth.NZ. It was the best decision we could have made. They were not only timely but also logical in their approach and really great to interact with. Our bills have never reached the levels seen in our previous properties, and we've maintained an extremely comfortable indoor temperature. We wouldn’t hesitate to use them again in another build.”
- Greg M
“We absolutely love our underfloor heating system & we believe it’s the best way to heat a house. Well done to the crew at Warmth.NZ for such a good job! Their communication and workmanship were outstanding!”
- Roger M
“The product is amazing - our house sits at 20 degrees all day in winter with no heat pump on and everything works well. The guys at Warmth.NZ are friendly and know their stuff.
It is great that I was able to work with both them and One Vision Solar to create a system which runs on solar and makes heating my floor and house even more affordable.
If you are looking for a cost effective heating solution and want to incorporate in slab heating, hot water heat pump and solar, I would highly recommend talking to Warmth.NZ”
- Dan G
“Warmth.NZ supplied a replacement heat pump (supplied by a third party) to our existing underfloor system of seven years. From initial contact the knowledge and experience of underfloor systems ensured we were in good hands.
The install team were professional and friendly, the heat pump supplied is quiet and easy to operate and our power bill has reduced.
Our home is warm again as only hydronic underfloor can do. Huge thank you to Zsuzsa, Brian and team, they are specialists in hydronic underfloor heating”
- Keith M
The Numbers Tell the Story — and They’re Surprisingly Clear
The Numbers Tell the Story — and They’re Surprisingly Clear
Provider
Competitor A
Product Size
190L
Price
$7,000
Value
Lower Capacity
Provider
Competitor B
Product Size
270L
Price
$7,000
Value
Higher Price
Provider
Competitor C
Product Size
280L
Price
$7,325
Value
Highest Price
Provider
Warmth.NZ
Product Size
270L
Price
$6,499
Value
Best Price
Limited Offer — Secure Your Spot
Limited Offer — Secure Your Spot
This special pricing is available for a limited time and in limited quantities. Once the allocation is filled, standard pricing applies.
If you’ve been considering replacing your hot water system, now is the ideal time.
Get Your Warmth.NZ 2-in-1 Heat Pump Hot Water Cylinder
From Just $6,499 Installed
Click below to claim the offer and book your free assessment.
2 in 1 Heat Pump Cylinder: Common Questions Answered
2 in 1 Heat Pump Cylinder: Common Questions Answered
*Please Note about the offer:
This offer is only valid for Home Owners in Christchurch, NZ. Price is subject to an on-site consultation, additional installation charges may apply.
What is the R290 2in1 Hot Water Heat Pump?
The R290 2in1 Hot Water Heat Pump is an innovative system that provides both hot water heating (the heat pump) and water supply (the cylinder). It uses R290 refrigerant, which is known for its ultra-low Global Warming Potential (GWP), making it an environmentally friendly choice. The system is designed to be highly efficient, significantly reducing energy consumption and costs.
Does the R290 2in1 work with solar?
Yes, the R290 2in1 can be integrated with solar PV for even greater energy savings. By combining the heat pump with solar, you can further reduce your energy costs and enhance the sustainability of your home’s heating and hot water systems.
How does the 2in1 work?
The system works by the heat pump extracting energy from the air outside utilising the low boiling point of the R290 refrigerant. This heated water is then stored in a highly insulated tank, ready to be used for domestic hot water supply.
How much can I save on my energy bills with the 2in1?
Traditional hot water systems can account for up to 50% of your energy bill each mo.th The R290 2in1 Hot Water Heat Pump is significantly more efficient, potentially reducing this to a much lower percentage (as low as 15%!) While exact savings can vary depending on your usage and local energy costs, many homeowners experience substantial reductions in their energy bills after switching to this system.
*Please Note about the offer:
This offer is only valid for Home Owners in Christchurch, NZ. Price is subject to an on-site consultation, additional installation charges may apply.
What is the R290 2in1 Hot Water Heat Pump?
The R290 2in1 Hot Water Heat Pump is an innovative system that provides both hot water heating (the heat pump) and water supply (the cylinder). It uses R290 refrigerant, which is known for its ultra-low Global Warming Potential (GWP), making it an environmentally friendly choice. The system is designed to be highly efficient, significantly reducing energy consumption and costs.
Does the R290 2in1 work with solar?
Yes, the R290 2in1 can be integrated with solar PV for even greater energy savings. By combining the heat pump with solar, you can further reduce your energy costs and enhance the sustainability of your home’s heating and hot water systems.
How does the 2in1 work?
The system works by the heat pump extracting energy from the air outside utilising the low boiling point of the R290 refrigerant. This heated water is then stored in a highly insulated tank, ready to be used for domestic hot water supply.
How much can I save on my energy bills with the 2in1?
Traditional hot water systems can account for up to 50% of your energy bill each mo.th The R290 2in1 Hot Water Heat Pump is significantly more efficient, potentially reducing this to a much lower percentage (as low as 15%!) While exact savings can vary depending on your usage and local energy costs, many homeowners experience substantial reductions in their energy bills after switching to this system.